Filter
Top Products
Alarms
28 313289S
Optional User-Settable Spray Limits
T5A
T5B
Temperature exceeded alarm
limits
Always, if enabled Fluid temperature exceeded
high or low alarm limits for more
than four minutes.
If fluid temperature is too low,
return to circulation mode to
increase fluid temperature.
Adjust heater set point if
needed.See Heat Fluid section
in manual 312359.
If fluid temperature is too high,
lower heater set point, and
return circulation mode to cool.
See Heat Fluid section in man-
ual 312359.
Adjust temperature target set-
point. See Heat Fluid section in
manual 312359.
P2A
P2B
Pressure exceeded advisory
limits
Always, if enabled Pressure exceeded high or low
advisory limits for more than 15
seconds.
Same as P5A or P5B.
T2A
T2B
Temperature exceeded tem-
perature limits
Always, if enabled Fluid temperature exceeded
high or low limits for more than
four minutes.
Same as T5A or T5B.
N4D Pot life timer expired. Mixed
fluid will cure in hoses, mixer,
and gun.
Spray Have not sprayed enough vol-
ume to keep fresh mixed fluid in
the integration hose, mixer,
whip hose, and spray gun.
Spray fluid, or flush. Resets
when you leave spray mode.
See manual 312359. See
Flush, page 14.
Alarm
Code Alarm Problem When Active Cause Solution