Filter
Top Products
Run Mode Details
3A0868G 41
Run Pump Control (Screen 15)
Run Pump Control (Screen 15) displays if is
selected from the Run Home Screen. Use this screen to
manually start and stop a pump.
• Press to show the dropdown menu.
• Press to highlight, then press to select
a pump or the Park option.
• If Pump A or Pump B is selected, use or to
start. The selected pump will run for 12 cycles. To
stop before the 12 cycles are completed, press .
• If Park is selected, use to move the pump to the
bottom of the stroke to park it so pump rod is fully
enclosed in the lower and material can’t dry on shaft
during break or overnight.
F
IG
. 33. Run Pump Control (Screen 15)
Pump/Park selection
dropdown
Start
Stop
Home