Filter
Top Products
Setup Mode Details
46 3A0868G
Calibration 1 and 2 (Screens 22
and 23)
NOTE: See Pump Calibration, page 31, for detailed
instructions.
Calibration 1 (Screen 22) displays if is selected on
Setup Home (Screen 17). This screen displays the
pump factor for Pump A and Pump B. The factor is the
pump displacement per inch. The system starts at the
default factor for the pump size chosen on Configure 1
(Screen 18, page 43). Factor values update automati-
cally as needed based on calibration results from Cali-
bration 2 (Screen 23). Factor values also can be set on
this screen, from 5 to 50 cc/in.
Press to display Calibration 2 (Screen 23). This
screen allows the user to perform a calibration. It dis-
plays Pump A and Pump B factors, the target dispense
volume, the actual dispense volume (0 to 9999 cc), and
the material to dispense.
• Press to highlight the pump you wish to cali-
brate. Press . An X displays in the box.
• Press to start the calibration on the highlighted
pump (A or B). Press to cancel the calibration.
NOTE: If you press but calibration does not begin,
check to be sure that you have selected Pump A or
Pump B.
• Press to highlight the actual dispense vol-
ume field. Press to set the volume (from 0 to
9999 cc). Press to move between digits.
Press to change a digit. Press when
field is correct.
• Use to toggle between Calibration 1
(Screen 22) and Calibration 2 (Screen 23).
Troubleshooting (Screens
35-37)
Screens for testing system controls can be accessed by
setting the password to 9909. See Configure 3 (Screen
20), page 44, to set or change the password.
After setting the password to 9909, press to exit
Setup. Press to reenter Setup. Setup Home
(Screen 17) displays, with troubleshooting screen
options.
F
IG
. 43. Calibration 1 (Screen 22)
F
IG
. 44. Calibration 2 (Screen 23)
Pump B
Factor
Pump A
Factor
Home
Pump B
Factor
Pump A
Factor
Material to
dispense
Target
dispense
volume
Actual
dispense
volume
Start Pump
Calibration
Cancel Pump
Calibration
Home
F
IG
. 45. Setup Home with Troubleshooting
Troubleshooting
screen options
appear here.