Filter
Top Products
Setup Mode Details
42 3A0868G
Setup Mode Details
Press on any screen to enter the Setup screens. If
the system has a password lock, Password (Screen 16)
displays. If the system is not locked (password is set to
0000), Setup Home (Screen 17) displays.
Password (Screen 16)
From any Run screen, press to access the pass-
word screen. The Password Screen displays if a pass-
word has been set. Set the password to 0000 to prevent
Password (Screen 16) from displaying. See Configure 3
(Screen 20), page 44, to set or change the password.
• Press to enter the password (0000 to 9999).
Press to move between digits. Press
to change a digit. Press when field is
correct. Setup Home (Screen 17) displays.
• Press to toggle between Run Mode and Setup
Mode.
• Select to display Run Home (Screen 1). Enter-
ing an incorrect password also displays Run Home
(Screen 1).
Setup Home (Screen 17)
Setup Home (Screen 17) displays if is selected on
any screen and the system is not locked, or when a cor-
rect password is entered on the Password Screen. The
Setup Home screen displays the software versions of
the boards in the Display Module, Advanced Fluid Con-
trol Module, and the USB Module (if applicable).
• Press a soft key button to select one of the four
Setup Mode screen sections:
Configure , Recipe , Maintenance , or
Calibration .
• Press to toggle between Run Mode and Setup
Mode.
F
IG
. 34. Password (Screen 16)
F
IG
. 35. Setup Home (Screen 17)
Recipe MaintenanceConfigure Calibration
Software Version:
Display Module
Fluid Control Module
USB Module