Filter
Top Products
Model G0768/G0769 (Mfd. Since 8/15)
-3-
INTRODUCTION
Machine Description
We are proud to provide a high-quality owner’s
manual with your new machine!
We
made every effort to be exact with the
instruc-
tions, specifications, drawings, and photographs
in this manual. Sometimes we make mistakes, but
our policy of continuous improvement also means
that
sometimes the machine
you receive is
slightly different than shown in the manual
.
If you find this to be the case, and the difference
between the manual and machine leaves you
confused or unsure about something
,
check our
website for an updated version. W
e post
current
manuals and
manual updates for free
on our web-
site at
www.grizzly.com.
Alternatively, you can call our Technical Support
for help. Before calling, make sure you write down
the
Manufacture Date and Serial Number
from
the machine ID label (see below). This information
is required for us to provide proper tech support,
and it helps us determine if updated documenta-
tion is available for your machine.
Manufacture Date
Serial Number
Manual Accuracy
We stand behind our machines! If you have ques-
tions or need help, contact us with the information
below. Before contacting, make sure you get the
serial number
and manufacture date from the
machine ID label. This will help us help you faster.
Grizzly Technical Support
1203 Lycoming Mall Circle
Muncy, PA 17756
Phone: (570) 546-9663
Email: techsupport@grizzly.com
We want your feedback on this manual. What did
you like about it? Where could it be improved?
Please take a few minutes to give us feedback.
Grizzly Documentation Manager
P.O. Box 2069
Bellingham, WA 98227-2069
Email: manuals@grizzly.com
Contact Info
The Model G0768 and G0769 share lathe fea-
tures such as a 600 Watt (
3
⁄4 HP) 110V DC motor,
variable-speed controls with digital RPM display,
high/low spindle speed ranges, 4" 3-jaw and
4-jaw chucks, a convenient quick-lock tailstock, a
4-way turret toolpost, steady and follow rests, and
reverse feed for cutting left-hand threads.
The Model G0769 additionally features a 600
Watt (
3
⁄4 HP) milling headstock motor, 45° left/
right head tilt, coarse and fine downfeed con-
trols, Z-axis dovetailed ways for maximum pre-
cision, and a
1
⁄2" drill chuck. The cross slide
table features T-slots for mounting a vise. The
lathe/mill selector switch also makes chang-
ing between lathe and milling modes easy.
Both machines can be mounted on a sturdy work-
bench, or the optional Model T26599 stand—with
cabinet space for storing tooling and accessories.