Filter
Top Products
Model G0768/G0769 (Mfd. Since 8/15)
-87-
3. Unscrew front brush cap and carefully remove
brush from motor (see Figure 153).
Figure 152. Location of mill motor cover screws.
Replacing Mill Motor Brushes (G0769)
1. DISCONNECT MACHINE FROM POWER!
2. Remove drawbar cap, then remove motor
cover by removing cap screws (see Figure
152).
Cap Screw
(1 of 4)
4. Install new brush and re-install brush cap.
5. Repeat Steps 3–4 to replace rear motor
brush.
6. Replace mill motor cover and drawbar cap.
Figure 153. Front motor brush components
removed.
Brush Cap
Brush
Drawbar
Cap