Filter
Top Products
If the selection is made by clicking an icon in the Palette Bar, one
segment of the corresponding waveform will be added to the window with
default values. If the new waveshape segment causes the total points to
exceed 16,000, a warning dialog will appear, informing you that the
segment will not be added. Click OK and try a smaller number of points
or remove part of the existing waveform.
Standard waveshapes and their default parameters are described in
Chapter 4.
Freehand Drawing
Select the Freehand drawing mode by clicking the Freehand icon or by
selecting Waveforms | Freehand from the Menu Bar. The standard
cursor changes to a pencil cursor when inside the waveform edit window.
Draw the desired waveform shape by pressing and holding the left mouse
button. Release the mouse button to complete the freehand waveform
segment. Freehand waveform segments are automatically connected to
any pre-existing segments. You will remain in the Freehand drawing
mode until another mode is selected.
You are not allowed to draw over a standard waveshape unless you
thumbtack markers over one (see page 29). Drawing over another
freehand segment will modify the existing points.
3
Chapter 3 Using HP BenchLink/Arb
Creating Waveforms
27