Filter
Top Products
This chapter lists error and information messages to assist you in the
operation of HP BenchLink/Arb. The words in bold type are the message
content. The type of message is indicated in the middle column and is
followed by the explanation and/or suggested action to be taken. Number
or name indicates that there is more than one number or name that can
appear in the message.
Message Type Suggested Action
Couldn’t start application:
name.exe
Error Message This error message indicates HP BenchLink/Arb
could not find an application corresponding to
the instrument selected from the Toolbar
Instrument list. If the instrument is supported
by a BenchLink family software product, try
starting the named application and try again.
Expected instrument not
found.
Error Message This error message indicates that the
instrument described in the HP BenchLink/Arb
initialization file did not respond to
HP BenchLink/Arb using the current
communications setup. Use the Interface Setup
dialog box to make changes to the
communications settings.
Found a name at address
number.
Information
Message
This information message indicates that
HP BenchLink/Arb has successfully established
communications with the function generator at
the HP-IB address or COM port specified in the
Setup Interface dialog box.
Instrument address or
controller settings do not
match initialization file. Do
you want to change interface
settings now?
Information
Message
This information message indicates that upon
startup, HP BenchLink/Arb did not find the
controller or instrument default address(es) as
listed in the initialization file. Choose YES to
display the Interface Setup dialog box or NO to
cancel.
Instrument at address
number not responding.
Error Message HP BenchLink/Arb was unable to perform the
attempted operation with the displayed function
generator. Select Options | Configure Interface...
from the Menu Bar and test the communications
to that instrument before resuming.
Interface timed out sending:
name. Try again?
Error Message This error message indicates that the attached
instrument did not respond to a query from
HP BenchLink/Arb. Restart HP BenchLink/Arb
and try again.
6
Chapter 6 Error and Information Messages
66