Filter
Top Products
Message Type Suggested Action
No instruments found. Make
sure all cables are properly
installed and instruments
are powered on.
Error Message This error message indicates HP BenchLink/Arb
cannot find an attached function generator. If
you are using RS-232, be sure the correct 9- or
25-pin cables have been used, the function
generator is powered on, and the RS-232 settings
of the function generator match the settings in
the Setup Interface | Settings... dialog box. If
you are using HP-IB, ensure that the cables are
securely fastened and the function generator is
turned on. Also verify that the function
generator interface is set to HP-IB.
Not enough room to paste
waveform.
Error Message This error message indicates the selected
waveform cannot be pasted without exceeding
the maximum number of points allowed in an
HP BenchLink/Arb waveform edit window
(16,000). Click OK and select a smaller waveform
or open another window to paste the waveform
into.
Please enter an integer
between number and number.
Error Message This error message indicates the number entered
in the text box is not acceptable. Change the
number to a valid one and click OK.
Save changes to name? Information
Message
This information message indicates that the
specified window you wish to close is new or has
been changed. Click YES to save the waveform
information, NO to delete it, or CANCEL to
cancel the command.
The following required files
were not found in your
\windows\system directory:
(Names).
Error Message This error message indicates that the named
files should be installed by HP BenchLink/Arb.
Reinstall HP BenchLink/Arb.
This file already exists.
Replace existing file?
Error Message This error message indicates that the named file
will be overwritten by new data if you choose
YES.
This instrument is not
supported by HP
BenchLink/Arb and no other
application was associated
with this instrument.
Error Message This error message indicates there is an
instrument on the bus that is not supported by
an installed HP BenchLink software product.
Select a valid instrument before attempting any
operations.
6
Chapter 6 Error and Information Messages
67