Intel SBX82 Saw User Manual


 
20 Intel Server Compute Blade SBX82 Installation and User’s Guide
Do not leave the device where others can handle and possibly damage it.
While the device is still in its non-conductive package, touch it to an unpainted metal part of the
SBCE unit or any unpainted metal surface on any other grounded rack component in the rack
you are installing the device in for at least 2 seconds. This drains static electricity from the
package and from your body.
Remove the device from its package and install it directly into the blade server without setting it
down. If it is necessary to set the device down, place it back into its non-conductive package. Do
not place the device on your blade server cover or on a metal surface.
Take additional care when handling devices during cold weather. Heating reduces indoor
humidity and increases static electricity.
Installing and removing the blade server from the SBCE
unit
To install or remove a blade server from the SBCE unit, see the documentation that came with your
unit for instructions.
Opening the blade server cover
The following illustration shows how to open the cover on the blade server.
Blade-cover
release
Blade-cover
release