Filter
Top Products
44 Intel Server Compute Blade SBX82 Installation and User’s Guide
Installing the blade server bezel assembly
The following illustration shows how to install the bezel assembly on the blade server.
Complete the following steps to install the blade server bezel assembly:
1. Read the safety information beginning on page “Safety” on page vii and “Installation
guidelines” on page 19.
2. Connect the control-panel cable to the control-panel connector on the system board.
3. Carefully slide the bezel assembly onto the blade server, as shown in the illustration, until it
clicks into place.
Control panel
connector
Bezel-assembly
release
Bezel-assembly
release
Control-panel
cable