Filter
Top Products
Chapter 2
Installation
2
This Chapter covers the physical installation of the Wireless ADSL2+
Router.
Requirements
• Network cables. Use standard 10/100BaseT network (UTP) cables with RJ45
connectors.
• TCP/IP protocol must be installed on all PCs.
• For Internet Access, an Internet Access account with an ISP, and a DSL
connection.
• To use the Wireless Access Point, all Wireless devices must be compliant with the
IEEE 802.11g or IEEE 802.11b specifications.
Procedure
Figure 4: Installation Diagram
1. Choose an Installation Site
Select a suitable place on the network to install the Wireless ADSL2+ Router.
For best Wireless reception and performance, the Wireless ADSL2+
Router should be positioned in a central location with minimum
obstructions between the Wireless ADSL2+ Router and the PCs.
Also, if using multiple Access Points, adjacent Access Points
should use different Channels.
7