Filter
Top Products
2. Click the Add button. You will see a screen like the example below.
Figure 39: Add Wireless Network
3. Configure this screen as follows:
• Enter the correct SSID, as used on the WBR-3600 Router. Remember the
SSID is case-sensitive, so be sure to match the case, not just the spelling.
• Set Network Authentication and Data Encryption to match the WBR-3600
Router.
• If using data encryption (WEP or WPA-PSK), enter the key used on the WBR-
3600 Router. See the preceding sections for details of WEP and WPA-PSK.
• Uncheck the options The key is provided for me automatically and This is a
computer-to-computer (ad hoc) network.
• Click OK to save and exit.
50