Filter
Top Products
2. Connect LAN Cables
Use standard LAN cables to connect PCs to the Switching Hub ports on the
Wireless ADSL2+ Router. Both 10BaseT and 100BaseT connections can be used
simultaneously.
If required, connect any port to a normal port on another Hub, using a standard
LAN cable. Any LAN port on the Wireless ADSL2+ Router will automatically
function as an "Uplink" port when required.
3. Connect ADSL Cable
Connect the supplied ADSL cable from to the ADSL port on the Wireless ADSL2+
Router (the RJ11 connector) to the ADSL terminator provided by your phone
company.
4. Power Up
Connect the supplied power adapter to the Wireless ADSL2+ Router. Use only the
power adapter provided. Using a different one may cause hardware damage.
5. Check the LEDs
• The PWR LED should be ON.
• For the LAN (PC) connection, one of the LAN LEDs should be ON (provided the
PC is also ON.)
• The WLAN LED should be ON
• The DSL LED should be ON if ADSL line is connected.
• The NET LED may be OFF. After configuration, it should come ON.
For more information, refer to Front-Panel LEDs in Chapter 1.
8