LevelOne 11g Wireless ADSL2+ Router Router User Manual


 
Configuration Program
The WBR-3600 Router contains an HTTP server. This enables you to connect to it,
and configure it, using your Web Browser. Your Browser must support JavaScript.
The configuration program has been tested on the following browsers:
Netscape 7.1 or later.
Mozilla 1.6 or later
Internet Explorer V5.5 or later
Preparation
Before attempting to configure the WBR-3600 Router, please ensure that:
Your PC can establish a physical connection to the WBR-3600 Router. The PC
and the WBR-3600 Router must be directly connected (using the Hub ports on the
WBR-3600 Router) or on the same LAN segment.
The WBR-3600 Router must be installed and powered ON.
If the WBR-3600 Router's default IP Address (192.168.0.1) is already used by
another device, the other device must be turned OFF until the WBR-3600 Router
is allocated a new IP Address during configuration.
Using your Web Browser
To establish a connection from your PC to the WBR-3600 Router:
1. After installing the WBR-3600 Router in your LAN, start your PC. If your PC is
already running, restart it.
2. Start your WEB browser.
3. In the Address box, enter "HTTP://" and the IP Address of the WBR-3600 Router,
as in this example, which uses the WBR-3600 Router's default IP Address:
HTTP://192.168.0.1
4. When prompted for the User name and Password, enter values as follows:
User name: admin
Password: password
11