LevelOne 11g Wireless ADSL2+ Router Router User Manual


 
Figure 7: Setup Wizard - Internet Access
4. On the Internet Access Screen, shown above, select the correct connection type,
as used by your ISP. Click "Next" and complete the configuration for your
connection method.
You need the data supplied by your ISP. Your ISP's data will also have the
DSL Multiplexing Method ( LLC or VC )
The common connection types are explained in the following table..
Details ISP Data required Connection
Type
Dynamic
IP Address
Your IP Address is allocated
automatically, when you
connect to you ISP.
Often, none.
Some ISP's may require you to
use a particular Hostname or
Domain name, or MAC (physical)
address.
Static (Fixed)
IP Address
Your ISP allocates a
permanent IP Address to
you. Usually, the connection
is "Always on".
IP Address allocated to you, and
related information, such as
Network Mask, Gateway IP
address, and DNS address.
PPPoE, PPPoA You connect to the ISP only
when required. The IP
address is usually allocated
automatically.
a) User name and password are
always required.
b) If using a Static (Fixed) IP
address, you need the IP address
and related information (Network
Mask, Gateway IP address, and
DNS address)
IPoA
(IP over ATM)
Normally, the connection is
"Always on".
IP Address allocated to you, and
related information, such as
Network Mask, Gateway IP
address, and DNS address.
14