LevelOne 11g Wireless ADSL2+ Router Router User Manual


 
Internet (VC1)
Displays the current connection method, as set in the Setup
Wizard.
Connection Method
This indicates the current status of the Internet Connection
Active - Connection exists
Idle - No current connection, but no error has been
detected. This condition normally arises when an idle
connection is automatically terminated.
Failed - The connection was terminated abnormally.
This could be caused by Modem failure, or the loss of
the connection to the ISP's server.
If there is an error, you can click the "Connection Details"
button to find out more information.
Connection Status
This IP Address is allocated by the ISP (Internet Service
Provider). If using a dynamic IP address, and no connection
currently exists, this information is unavailable.
Internet IP Address
It displays the MAC address for the WAN.
WAN MAC Address
Click this button to open a sub-window and view a detailed
description of the current connection. Depending on the
type of connection, a "log" may also be available.
Connection Details
LAN
The IP Address of the WBR-3600 Router.
IP Address
The Network Mask (Subnet Mask) for the IP Address
above.
Network Mask
This shows the status of the DHCP Server function. The
value will be "Enabled" or "Disabled".
DHCP Server
This shows the MAC Address for the WBR-3600 Router, as
seen on the LAN interface.
MAC Address
Wireless
If using an ESS (Extended Service Set, with multiple
access points) this ID is called an ESSID (Extended Service
Set Identifier).
Name (SSID)
The current region, as set on the Wireless screen.
Region
This shows the Channel currently used, as set on the
Wireless screen.
Channel
This indicates whether or not the Wireless Access Point
feature is enabled.
Wireless AP
This indicates whether or not the SSID is Broadcast. This
setting is on the Wireless screen.
Broadcast Name
System
The current name of the Router. This name is also the
"hostname" for users with an "@Home" type connection.
Device Name
Firmware Version
The version of the current firmware installed.
54