Filter
Top Products
Wi-Fi Protect Setup
Wi-Fi Protected Setup (WPS) is based on push-button or PIN (Personal Identification
Number) entry authentication to provide strong WPA/WPA2 encryption keys to client
devices. Users can push a button on the WBR-3600 router and the client device to
exchange the encryption key. With a PIN, users can enter a code generated by the
client device to connect to the network.
View the Wi-Fi Protect Setup on the Wireless screen like the following.
Figure 12: Wi-Fi Protect Setup Screen
Data – Wi-Fi Protect Setup Screen
Wi-Fi Protect Setup
Enable this if you want to use Wireless WPS function.
(If enabled the WPS then it only can support Disabled And
WPA-PSK/WPA2-PSK.)
Enable WPS
Click the Regenerate button to have the new pin code displayed
in the field.
AP PIN Code
Push the WPS PBC button on the wireless screen to establish
the wireless connection.
WPS Push
Button
Enter the PIN code and click OK to add the client device.
Input Client
PIN Code
The WPS Function only provides strong WPA/WPA2 encryption
keys to client devices. Please check the wireless security is select
WPA-PSK or WPA2-PSK.
24