Filter
Top Products
This is also called the "Network Name".
• If using an ESS (Extended Service Set, with multiple access
points) this ID is called an ESSID (Extended Service Set
Identifier).
• To communicate, all Wireless stations should use the same
SSID/ESSID.
SSID
Options
Select the desired mode:
• 802.11g & 802.11b - Both 802.11.g and 802.11b Wireless
stations will be able to use the WBR-3600 Router.
• 802.11g only - Only 802.11g Wireless stations can use the
WBR-3600 Router.
• 802.11b only - Only 802.11b connections are available.
802.11g Wireless Stations will only be able to use the WBR-
3600 Router if they are fully backward-compatible with the
802.11b standard.
Mode
Select the Channel you wish to use on your Wireless LAN.
• If you experience interference (shown by lost connections
and/or slow data transfers) you may need to experiment with
different channels to see which is the best.
• If using multiple Access Points, adjacent Access Points
should use different Channels to reduce interference.
Channel No.
If enabled, the WBR-3600 Router will broadcast its SSID. This
allows PCs and other wireless stations to detect this Access
Point and use the correct SSID.
If disabled, PC users will have to manually enter the SSID and
other details of the wireless interface before they can connect to
this Access Point.
Broadcast
SSID
WMM provides improved QoS over wireless connections for
better video and voice performance. The default is Enable.
WMM Support
Wireless Security
The current Wireless security is displayed. The default value is
Disabled.
Current Setting
Click this button to access the Wireless security sub-screen, and
view or change the settings. See the following section for details.
Configure
Button
Access Point
Enable
Wireless
Access Point
Enable this if you want to use Wireless Access Point function.
If disabled, no Wireless stations can use the Access Point
function, and all connections must be made via the wired LAN.
22