Filter
Top Products
SP-100
Return to Section TOC Return to Section TOC Return to Section TOC Return to Section TOC
Return to Master TOC Return to Master TOC Return to Master TOC Return to Master TOC
C-1
ACCESSORIES
K467 INPUT LINE CORD
The K467 Input Line Cord is the same as
the line cord supplied with the SP-100, but
has a NEMA type 5-20P plug for use on 25
amp branch circuits.
To install optional features, refer to in-
structions included with the kit.
REPLACEMENT PARTS
Complete Gun and Cable Assembly
L7538 – Black Trigger; L8311-2 (K530-2) –
Red Trigger
Contact Tip 0.025” (0,6 mm)
S18704-1 – Black Trigger; S19726-1 – Red
Trigger
Contact Tip 0.030” (0,8 mm)
S18704-2 – Black Trigger; S19726-2 – Red
Trigger
Contact Tip 0.035” (0,9 mm)
S18704-3 – Black Trigger; S19726-3 – Red
Trigger
Liner 0.023 - 0.030” (0,6 - 0,8 mm)
S18704-4 – Black Trigger; M16291-2 – Red
Trigger
Liner 0.035” (0,9 mm)
S18704-5 – Black Trigger; M16291-1 – Red
Trigger
Gas Diffuser
S18704-6 – Black Trigger; S19728 – Red
Trigger
Gas Nozzle
S18704-7 – Black Trigger; M16294 – Red
Trigger
Gasless Nozzle (Innershield Only)
S18704-14 – Black Trigger; M16418 – Red
Trigger
LINCOLN GAS REGULATOR KITS
The Lincoln K463 CO
2
or K499 Ar-mixed
Gas Regulator and Hose Kit is recommend-
ed for use with the SP100.
K463 CO
2
Regulator
The K463 kit includes a preset, non-
adjustable pressure flow regulator for use
on CO
2
cylinders. The K463 CO
2
pressure-
flow regulator is preset at the factory to pro-
vide a flow rate of 20 cubic feet per hour (10
l/min). This setting cannot be changed. Also
included is a 10 foot (3,0 m) gas hose which
connects to the rear of the SP-100.
The K463 CO
2
pressure-flow regulator can
be used with a cylinder of argon mixed gas
if a CGA-580-320 (Western Enterprises No.
810) adapter is used between the cylinder
and the regulator.
Weld shielding gas may be obtained from a
welding supply distributor.
K499 Ar-Mixed Gas Regulator
K499 Ar-Mixed Gas Regulator and Hose Kit
– Includes a preset, non-adjustable pres-
sure and flow regulator for use on argon-
mixed gas cylinders. Also included is a 10
foot (3 0 m) gas hose which connects to the
rear of the SP-100.
INNERSHIELD WELDING KITS
0.035 (0.9 mm) Innershield Welding Kit
– Includes a contact tip, a gasless nozzle
and a cable liner to permit the SP-100 gun
and cable to use a 0.035” (0,9 mm) dia-
meter flux-cored electrode. Also included
is a spool of 0.035 (0,9 mm) Innershield
NR-211-MP.
Two kits are available:
K549-1 kit is for use with Magnum 100L
gun (with red trigger).
K464 kit is for use with the original
Lincoln Electric gun (with black trigger).
DRIVE ROLL
M15448-1 Reversible Drive Roll with double
knurled grooves for 0.035 (0,9 mm) cored
electrode.