Outback Power Systems OBX-IC2024S-120/60 Battery Charger User Manual


  Open as PDF
of 44
 
34
OBX-IC2024S-120/60 Inverter/Charger Specications
Nominal DC Input Voltage Range 24 Vdc
Nominal AC Voltage / Frequency 120 Vac / 60 Hz
ContinuousPowerRatingat25°CAmbient 2000 VA
ContinuousACRMSOutputat25°C 16.7Aac
Idle Power - Full AC Output ≈ 20 watts
Idle Power - Search Mode 6 watts
Typical Eciency 92%
Total Harmonic Distortion - Typical 2%
Output Voltage Regulation ±2%
Maximum Output Current – Peak (1 mSec) 70Aac
Maximum Output Current - RMS (100 mSec) 50Aac
AC Overload Capability - Surge 6000 VA
ACOverloadCapability-5Second 4800VA
AC Overload Capability - 30 Minutes 3200 VA
AC Input Current Maximum 30 Aac
AC Input Voltage Range 80to150Vac
AC Input Frequency Range 54.0to66.0Hz
DC Input Range 21.0 to 34.0 Vdc
DC Input Current – Rated Power 100 Adc
Maximum DC Input Surge Current 300 Adc
Continuous Battery Charger Output 55Adc
Recommended DC Voltage Range
24V Systems 21 – 34 Vdc
Maximum DC Input Current
Note: This is the maximum DC current the Inverter will draw from the battery when starting very large AC loads. It
is not used for sizing the DC disconnect or selecting DC cable gauge. It is used to select the minimum reasonable
battery capacity.
OBX-IC2024S-120/60 Inverter 300 Adc
Rated DC Input Current
Note: This is the maximum continuous DC current that the Inverter will draw from the batteries when inverting.
OBX-IC2024S-120/60 Inverter 100 Adc
 previous next