Filter
Top Products
PicoScope and oscilloscope primer
18
Copyright 2006 Pico Technology Limited. All rights reserved. PSW044-2.0
5.16
Windows, views and viewports
PicoScope's display area contains one or more capture windows . Each one
corresponds to a block of data captured from a scope device . The simplest case is a
single scope device that produces a single capture, with the result shown in a single
capture window.
A capture window contains one or more views . When you first open a capture
window, it contains a single view. You can zoom and pan this to show various
different waveforms based on the data that the scope device captured. If you wish,
you can add more views to a capture window (how?). Each view is a differently
zoomed and panned section of the same capture.
Multiple views in a capture window are always arranged in a grid. Each location in the
grid is called a viewport, and can be empty or occupied by one or more views.
Upgrading from PicoScope 5
PicoScope 5 allowed you to have multiple scope views. PicoScope 6.0 retains this
ability, although it calls them capture windows. The views feature is new to
PicoScope 6.0.
9
68
14
58
9 14