Filter
Top Products
Menus
26
Copyright 2006 Pico Technology Limited. All rights reserved. PSW044-2.0
6.4.1
Add / Edit Measurement dialog
This dialog allows you to add a measurement of a waveform to the selected capture
window , or edit an existing measurement. PicoScope automatically refreshes the
measurement every time it updates the waveform. If this is the first measurement for
the capture window, PicoScope will create a new measurements table to display the
measurement; otherwise, it will add the new measurement to the bottom of the
existing table.
Where to find it
Click the Add Measurement or Edit Measurement button on the
Measurements toolbar or in the Views menu, or double-click a measurement in the
measurements table .
Channel: Select one of the scope device 's channels to measure.
Type: PicoScope can calculate a wide range of measurements for waveforms.
See Measurement Types for details.
Section: You can measure the whole trace, just the section between rulers , or a
single cycle that you point to using one of the rulers.
Where to find it
Click the Edit Measurement button on the Measurements toolbar or in the
Views menu,
9
11
52
11
68
63
68
52