Filter
Top Products
Menus
38
Copyright 2006 Pico Technology Limited. All rights reserved. PSW044-2.0
6.5.2.7
Custom Probe Identification dialog
This dialog follows the Range Management dialog . It allows you to enter text to
identify the custom probe.
How to use the dialog
Click Back to return to the Range Management dialog (or the Manual Ranges Setup
dialog if you chose manual setup).
The probe name will appear in the probe list.
The description is not used in the present version of the software.
Fill in the text fields and click Next to continue to the Custom Probe Finished dialog
.
34
34
35
39