Filter
Top Products
Toolbars
54
Copyright 2006 Pico Technology Limited. All rights reserved. PSW044-2.0
7.8
Signal Generator toolbar
The Signal Generator toolbar allows you to set up your scope device 's test signal
output. If the scope device has no test signal output, this toolbar will not appear.
Signal Generator. The "E" on this control stands for "External",
and refers to the "E" label on the scope device's test signal output.
Clicking the control opens the Signal Generator dialog .
7.8.1
Signal Generator dialog
This dialog controls the scope device 's built-in signal generator. It is not available if
the selected scope device does not have a signal generator. The number of controls in
the dialog may vary according to the type of scope device in use.
Left:
Signal generator dialog for the PicoScope
3206
68
54
68