Filter
Top Products
Toolbars
58
Copyright 2006 Pico Technology Limited. All rights reserved. PSW044-2.0
7.11
Zooming and Scrolling toolbar
The Zooming and Scrolling toolbar allows you to move around a scope view .
There is a keyboard shortcut for each button.
Normal Selection tool (Ctrl+S or Escape). This button turns the pointer
into a standard arrow that you can use to click buttons, drag rulers and
operate any other controls that appear in the PicoScope window.
Hand tool (panning) (Ctrl+D). This button turns the pointer into a hand
tool that you can use to click and drag the scope view to pan it
vertically and horizontally when you are zoomed in. You can also pan
using the scroll bars. Press the Escape key to return to the Normal
Selection tool.
Zoom In tool (Ctrl+I). This button turns the pointer into a zoom-in tool.
Click the tool on the scope view to double the magnification of the
horizontal and vertical axes. Scroll bars will appear, which you can drag to
pan around the view, or you can pan by using the Hand tool (see above).
Press the Escape key to return to the Normal Selection tool.
Zoom Out tool (Ctrl+O). This button turns the pointer into a zoom-out
tool. Click the tool on the scope view to zoom out both horizontally and
vertically by a factor of two. You cannot zoom out beyond 100% (normal
size). Press the Escape key to return to the Normal Selection tool.
Marquee Zoom tool (Ctrl+M). This button turns the pointer into a
marquee zoom tool. Use it to draw a box called a marquee on the scope
view and PicoScope will magnify that box to fill the view. Scroll bars
will appear, which you can drag to pan around in the view, or you can pan
by using the Hand tool (see above). Press the Escape key to return to
the Normal Selection tool.
100% (Ctrl+U). Resets the scope view to normal size. The view will no
longer have scroll bars, and panning will no longer be possible.
14
68
14
14
14
14
14