Filter
Top Products
Menus
20
Copyright 2006 Pico Technology Limited. All rights reserved. PSW044-2.0
6.1
File menu
Click File on the Menu bar .
Create New Scope Window
.
This command is equivalent to the New
Capture Window button on the Capture Windows toolbar . If PicoScope
has not yet found a scope device, it will first open the Open Device dialog
to ask you which scope device to use; otherwise, it will assume that you
wish to use the same scope device as was used for the previous capture
window. PicoScope will then open a new capture window for the chosen
scope device, and will fill the window with a new scope view . You can
open up to five capture windows.
Open. Allows you to select the file you want to open. PicoScope can open
*.
psdata
and
*.psd
files, which contain both waveform data and scope device
settings, and
*.pssettings
and
*.pss
files, which contain only scope device
settings. You can create your own files using the Save and Save As...
commands, described below. If the file was saved using a different scope
device from the one that is presently connected, PicoScope may need to
modify the saved settings to suit the present device.
Opening a new file will close any capture windows that are currently open.
Merge. Opens a settings or waveforms file without closing any that are
currently open. You cannot exceed a total of ten capture windows.
Save As. Opens the Save As dialog , which allows you to save the settings
and waveforms for all capture windows in various formats.
Save Default Settings. Saves the current settings so that they become the
defaults. The new default settings will then be loaded the next time you start
PicoScope.
Print Preview. Opens the Print Preview window, which allows you to see
how your workspace will be printed when you select the Print command.
Print. Opens a standard Windows Print dialog, which allows you to choose a
printer, set printing options and then print the selected view.
Exit. Close PicoScope without saving any data.
19
45
46
68
9
14
21
9