Filter
Top Products
PicoScope 6 User Guide
45
Copyright 2006 Pico Technology Limited. All rights reserved.PSW044-2.0
7.1
Buffer Navigation toolbar
The Buffer Navigation toolbar allows you to select one waveform from the buffer of
stored waveforms.
The waveform buffer
When you click the Start button , PicoScope clears the waveform buffer and then
adds a new waveform every time the scope device captures data, until the buffer is
full or you click the Stop button .
You can review the waveforms stored in the buffer using these buttons:
First waveform button. Displays waveform 1.
Previous waveform button. Displays the previous waveform in the
buffer.
Waveform number indicator. Shows which waveform is currently
displayed, and how many waveforms the buffer holds. You can edit the
number in the box and press Enter, and PicoScope will jump to the
specified waveform.
Next waveform button. Displays the next waveform in the buffer.
Last waveform button. Displays the last waveform in the buffer.
7.2
Capture Windows toolbar
The Capture Window toolbar allows you to open a capture window .
The toolbar contains the following button:
New Capture Window button. If PicoScope has not yet found a scope
device, clicking this button first opens the Open Device dialog to allow
you to select a scope device , then opens a new capture window for
the selected scope device. If a capture window is already open, this button
simply opens another capture window for the same scope device. To
switch scope devices, you must close and then restart PicoScope.
56
56
9
46
68 9