Filter
Top Products
CHAPTER 3. Ошибка! Стиль не определен.
3-4
© SAMSUNG Electronics Co., Ltd.
2) A modem board is mounted to connector P7/P8 of the MP10/11 board.
When mounting a modem board, the holes on the corners of the modem should be
aligned fitting with the spacer.
Figure 3.3 Mounting a Modem Board on the MP10/11 Board
4SWM or 4DLM can be mounted to connector P11, P12 and P13 of the MP10/11
board. Screws are basically locked to the support beside P13. Unscrew and position the
screws to the connector direction of 4SWM/4DLM before mounting 4SWM/4DLM.
After that, tighten the screws fitting with the grooves of 4SWM/4DLM.
Figure 3.4 Mounting 4SWM/4DLM on the MP10/11 Board
MODEM
4SWM