Filter
Top Products
OfficeServ 7100 Installation Manual
© SAMSUNG Electronics Co., Ltd. 3-11
3.3.2 Mounting Interface Boards to Slots
The interface boards are mounted to Slot 1 and Slot 2 of the cabinet. The available slot
positions ‘3.1 Cabinet Configuration’.
Table 3.7 Interface Board Types and Available Slots
Category Interface Board Slots Available
TEPRI, TEPRI2 Slot 1 and Slot 2 of the cabinet Voice C.O. line
8TRK, UNI Slot 1 and Slot 2 of the cabinet
Voice extension 16DLI2, 8DLI, 16SLI2, 8SLI, 8Combo, UNI Slot 1 and Slot 2 of the cabinet
MGI, MGI64 Slot 1 and Slot 2 of the cabinet Data voice
application
LIM Slot 1 and Slot 2 of the cabinet
References
For the detailed features and functions for each interface board, refer to ‘OfficeServ
7200 System manual’.
The Procedure for mounting the interface board to each slot is as follows:
1) Check the exterior of the interface board for any damages.
2) Align each Interface board to the guardrail of the universal slot of the OfficeServ 7100
basic cabinet or expansion cabinet, and slide the Interface board into the slot.
Figure 3.11 Mounting an Interface Board on a Slot