Filter
Top Products
OfficeServ 7100 Installation Manual
© SAMSUNG Electronics Co., Ltd. 3-7
3.3.1.1 Mounting UNI Board
The UNI board has three connectors to mount option boards and the mountable modules
are 4TRM, 2BRM, 4DLM and 4SLM. For user’s purpose, up to three modules can be
mounted regardless of the type of the option module. Module1, Module2 and Module3 are
positioned on the basis of the front panel of the UNI board, and the interface of the
corresponding module is marked on the front panel of the UNI board.
Align the module to be mounted to the top connector(16-pin connector). After that, match
the bottom connector(100-pin connector). Mount two connectors grasping both connectors.
Lock the supporter between the grooves and the top of each option board with screws.
Figure 3.7 Mounting the UNI Board
4TRM
4SLM