Filter
Top Products
OfficeServ 7100 Installation Manual
© SAMSUNG Electronics Co., Ltd. I
INTRODUCTION
Purpose
OfficeServ 7100 is the most suitable system for offices using circuit lines with 10 to 25
subscribers. This manual describes the condition for OfficeServ 7100 system installation
and how to install, inspect and operate the system.
Document Content and Organization
This document consists of eight chapters, and abbreviations as follows:
CHAPTER 1. Before Installing
This chapter describes the checklists, such as the installation site and the grounding & the
power conditions, to be inspected before installing the OfficeServ 7100 system.
This chapter also describes the items included in the OfficeServ 7100 package and the
installation procedure.
CHAPTER 2. Installing Cabinets
This chapter describes how to install an OfficeServ 7100 cabinet on the ground or inside a
rack, depending on the installation environment, and how to connect the grounding wire.
CHAPTER 3. Mounting and Replacing Boards
This chapter describes how to mount or replace various boards of the OfficeServ 7100
system.
CHAPTER 4. Connecting External Batteries
This chapter describes how to connect an external battery to the OfficeServ 7100 system.
CHAPTER 5. Connecting the Power
This chapter describes how to connect the power to the OfficeServ 7100 system.
CHAPTER 6. Connecting C.O. Lines
This chapter describes how to connect C.O. lines to the OfficeServ 7100 system.