Filter
Top Products
OfficeServ 7100 Installation Manual
© SAMSUNG Electronics Co., Ltd. 3-5
3.2.2 Mounting Control Boards
Mount a control board to the slot 0 of the OfficeServ 7100 cabinet. For the locations of slot
0 to slot 2, refer to ‘3.1. Cabinet Configuration’.
Table 3.4 Control Board Types
Control Board Mountable Slot
MP10/11 Slot 0 of the Basic Cabinet
Mount the MP10/11 board as follows:
1) Check if the MP10/11 board to be mounted is damaged.
Caution for the power when mounting boards
Check if the cabinet power is off when mounting boards on slots. Inserting or
ejecting a board while the power is on may damage the board or cause fire.
2) Align the MP10/11 board to the guardrail of slot 0 of the basic cabinet, and slide the
board into the slot with care.
Figure 3.5 Mounting the Control Board to Slot 0
3) Press and lock the lever on the front panel of the MP10/11 board to fully insert to the
connector of the OfficeServ 7100 connector.
Figure 3.6 Inserting the Control Board to a connector of the Main Board