Filter
Top Products
Assembly
3. Attach spacer between each foot as-
sembly and bottom shelf: use one screw
per spacer (insert screw through foot as-
sembly); on end of each screw put washer,
then nut, and wrench tighten.
Attach Skirts
1. Set out:
-two skirts
-ten v4" diam x vz" long truss head
screws
-ten v4"diam lock washers
-ten 1/4"diam hex nuts.
2. Turn cabinet right side up. Attach
skirts, across front and rear of cabinet, to
side panels: use four screws per skirt (in-
sert screws through skirt); on end of each
screw put washer, then nut, and finger
tighten.
Side
Panel
\
/
[
Skirt
Rear
1" Long
Screw
_....----- Spacer
_kirt
3. Put screw through hole at bottom rear
of right side panel and through raised
edge of bottom shelf. On end of screw
put washer, then nut, and wrench tighten.
Repeat for left side panel.
Shelf
Righl Side
Panel
Front
22