Filter
Top Products
Digital Display
Install Battery
1. Set out
-battery
-battery. cover.
2. Position battery with angled corner on
top right and slide battery all the way into
opening behind digital display, pushing
slightly downward until it snaps into place.
3. Look at display. It should look like this:
If it shows nothing, push in and slightly
upwards on battery to remove it, then re-
install.
If there still is no display, remove bat-
tery, wipe off contacts, then re-install.
If there is still no display, try a new 6V
alkaline battery or contact Sears.
4. When display shows correctly, snap bat-
tery cover into place.
5. Follow steps to align encoders and set
zero reference points.
To Replace Battery
I. lJse screwdriver to pry off battery
cover.
2. Push in and slightly upwards on battery
to remove it. Install new 6V alkaline bat-
terv.
3. Follow steps to set zero reference
poi nts.
49