Filter
Top Products
-64-
For Machines Mfg. Since 3/11
16-Speed Gearhead Lathe
ACCESSORIES
SB1298—SBL Bench Lathe Shop Clock
SB1299—SBL Toolroom Lathe Shop Clock
SB1300—SBL Lathe with Man
These fine traditional shop clocks are constructed
with a metal antique-finished frame. They are
easy to read from a distance and measure 14"
in diameter. Pictures just don't do them justice.
They are very nice quality clocks and perfect for
the South Bend Lathe aficionado.
Figure 104. Antique-finished South Bend shop clocks.
SB1298 SB1299
SB1300
SB1247—MT#4 Bull Nose Center
• Cr-Mo steel; hardened to HRC60 ± 1
• Taper roller & ball bearing construction
• Great for turning pipes
Figure 102. SB1247 MT4 Bull Nose Center.
60°
1.81" 4.25"
6.73"
0.67"
2.48"
0.47"
SB1269—Taper Attachment
This taper attachment mounts quickly to the
back bed way of your lathe. Accurate tapers of up
to 12" can be produced without repositioning the
attachment, having to offset the tailstock, or
disengaging the cross slide nut. The Model
SB1269 features scales at both ends,
reading inches-per-foot and degrees. An angle
adjusting knob with fine threads achieves
exacting control when setting tapers.
Figure 103. Model SB1269 Taper Attachment
SB1251—Heavy-Duty Oak Tool Chest
Proudly made in the South Bend tradition, this
heavy-duty oak tool chest will safeguard your
finest tools for may years of dependable service.
Solidly constructed with mortis and tenon
joinery, this tool chest features a locking top lid
and front panel, and 13 drawers of various sizes.
Seven drawers even have removable dividers for
organizing and protecting tools and tooling. All
drawers and the top compartment are felt-lined
for added protection. The front panel secures
all drawers when the top lid is latched or locked
and neatly slides under the bottom drawer when
accessing the drawers. All hardware is brass
including the heavy-duty side handles.
Figure 105. Model SB1251 Oak Tool Chest