Tektronix 070-9197-00 Welding System User Manual


 
Syntax and Commands
PS2520G and PS2521G Programmer Manual
7
The header path and leaf node together form the command header.
Figure 4 shows the command header for the leaf node indicated in
Figure 3.
:SOURce:CURRent:PROTection:STATe
Root Node
Header Path
Leaf Node
Command Header
Figure 4: Command Header
Parameter
You must include values for commands that have parameters. In this
manual, the < > symbols enclose the parameter type when stating
the syntax of the command. For example, the syntax of the command
in Figure 5 includes the Boolean parameter type.
Space
Parameter
Type
:SOURce:CURRent:PROTection:STATe <Boolean>
Figure 5: Command Header with Parameter
Table 1 defines the Boolean and other parameter types for the
programmable power supplies.