Filter
Top Products
Status and Events
PS2520G and PS2521G Programmer Manual
55
Table 11: Error Messages
SCPI Error Code and Description
Front Panel
Error Code
SESR
Bit
0, “No error” — —
–100, “Command Error” — 5
–108, “Parameter not allowed” — 5
–109, “Missing parameter” — 5
–121, “Invalid character in number” — 5
–124, “Too many digits” — 5
–200, “Execution error” — 4
–200, “Execution error; STEP error” — 4
–221, “Setting conflict; Timer setting error” –064 4
–221, “Setting conflict; Overvoltage protection setting error” –065 4
–221, “Setting conflict; Address setting error” –066 4
–221, “Setting conflict; Voltage setting error” –067 4
–221, “Setting conflict; Current setting error” –068 4
–221, “Setting conflict; Recall setting error” –069 4
–221, “Setting conflict; Store setting error” –070 4
–221, “Setting conflict; STEP voltage or current setting error” — 4
–222, “Data out of range; Voltage too large” –016 4
–222, “Data out of range; Current too large” –017 4
–222, “Data out of range; Voltage too small” –018 4
–222, “Data out of range; Current too small” –019 4
–222, “Data out of range” — 4
–240, “Hardware error” — 4
–300, “Device-specific error; Overcurrent protection error” –012 3
–300, “Device-specific error; Overvoltage protection error” –013 3