Filter
Top Products
Status and Events
PS2520G and PS2521G Programmer Manual
53
Use the *SRE command to set the SRER. Use the *SRE? query to
read it.
The bits of the SRER correspond to the bits of the SBR. Refer to
Table 9 on page 50 for an explanation of each bit in the SBR.
OPER
Ċ
ESB MAV QUES
E/E Ċ Ċ
76543210
Figure 13: Service Request Enable Register (SRER)
OPERation Enable Register
Even though the OPERation Enable Register is present in the
programmable power supplies, the OPERation registers do not report
any conditions.
QUEStionable Enable Register
The QUEStionable Enable Register controls which types of events
are summarized by the QUES status bit in the SBR. Use the
STATus:QUEStionable:ENABle command to set the bits in the
QUEStionable Enable register. Use the STATus:QUEStionable:ENĆ
ABle? query to read it. Refer to Table 6 on page 46 for a description
of each of the bits in this register.