Tektronix 070-9197-00 Welding System User Manual


 
Syntax and Commands
PS2520G and PS2521G Programmer Manual
27
[SOURce:]VOLTage[:LEVel][:IMMediate][:AMPLitude]
Sets the voltage limit of the power supply. The query form returns
the voltage limit setting.
[SOURce:]VOLTage <NRf>|MAXimum|MINimum
[SOURce:]VOLTage?
On the PS2520G, <NRf> is a positive integer or real number from 0
to 37.00 volts for Output 1 and Output 2 and 0 to 6.50 volts for
Output 3.
On the PS2521G, <NRf> is a positive integer or real number from 0
to 21.00 volts for Output 1 and Output 2 and 0 to 6.50 volts for
Output 3.
<NR3>
SOURce:VOLTage 3.5 sets the voltage limit to 3.5 volts.
SOURce:VOLTage? returns 0.200E+1 if the voltage limit setting is
2 volts.
[SOURce:]VOLTage:PROTection[:LEVel]
Sets the overvoltage protection level. The query form returns the
present setting of the overvoltage protection circuit.
[SOURce:]VOLTage:PROTection[:LEVel] <NRf>|MAXimum|
MINimum
[SOURce:]VOLTage:PROTection[:LEVel]?
Syntax
Parameters
Returns
Examples
Syntax