Filter
Top Products
Syntax and Commands
PS2520G and PS2521G Programmer Manual
25
Table 5: State of Control Settings after *RST (Cont.)
Front Panel
Control
StateRelated Command
OCP
ON/OFF
[SOURce:]CURRent:PROTection
:STATe
ON
DELAY —
0
AUTO SEQ
SYSTem:AUTO OFF
RECALL
(memory
location)
—
00
OVP SET
[SOURce:]VOLTage:PROTection
[:LEVel]
MAXimum
(
PS2520G = 38.5 V
PS2521G = 22.5 V)
SERIES/INDEP
PARA/INDEP
INSTrument:COUPle:TRACking
NONE
*RST
[SOURce:]CURRent[:LEVel][:IMMediate][:AMPLitude]
Sets the current limit. The query form returns the current limit
setting.
[SOURce:]CURRent[:LEVel][:IMMediate]
[:AMPLitude] <NRf>|MAXimum|MINimum
[SOURce:]CURRent[:LEVel][:IMMediate]
[:AMPLitude]?
On the PS2520G, <NRf> ranges from 0 to 1.500 (amps) for Output 1
and Output 2 and 0 to 3.000 (amps) for Output 3.
Syntax
Syntax
Parameters