Filter
Top Products
Super Finish 27 • 31
39
GB
Repairs on the unit
Danger
Switch o unit (OFF).
-
pair.
Dismount trolley.1.
Screw o housing half with socket and remove.2.
Loosen cable connection (1).3.
Loosen cord in the mains connection terminal (2).4.
Replace unit connection line.5.
2
1
Danger
Switch o unit (OFF).
-
pair.
Remove stop screw, regulating knob and switch housing,
1.
see under 11.5 relief valve, points 1 to 4.
Screw hexagonal screws (g. 25, item 1) from the ange ring
2.
(2) with spanner 19 mm.
Remove paint section (3).3.
Remove insert (4) and diaphragm (5).4.
The diaphragm can only be used
5.
once. Always replace
diaphragm.
Before mounting, clean and dry diaphragm, insert and built-in
•
areas on screw ange (6) and on paint section (3).
Mounting takes place in the reverse order
First of all tighten hexagonal screws (1) with 10 Nm, then
6.
crosswise with 70 Nm.
1
3
6
4
5
2