Filter
Top Products
Prestige 100 and 100IH ISDN Router and Router/Hub
System Maintenance 10-15
Figure 10-11 Menu 24.7 – Software Update
10.6.1 Boot module commands
Prestige boot module commands are shown below. For ATBAx, x denotes the number preceeding
the colon to give the console port speed following the colon in the list of numbers that follows;
e.g. ATBA3 will give a console port speed of 9.6 Kbps. ATSE displays the seed that is used to
generate a password to turn on the debug flag in the firmware. The ATSH command shows
product related information such as boot module version, vendor name, product model, RAS code
revision, ISDN code revision, etc.
Figure 10-12 Boot module commands
To update software, system needs to be rebooted.
After system is rebooted, 'Enter Debug Mode' will be displayed.
Please enter 'atur' to upload RAS and ISDN code.
Do you want to continue (y/n):
Enter Menu Selection Number:
======= Debug Command Listing =======
ATHE
ATGO
ATUR
ATUR3
ATBAx
ATTD
ATSE
ATSH
print help
boot system
upload RAS code
upload RAS configuration file
change baud rate. 1:38.4,2:19.2,3:9.6,4:57.6,5:115.2
download configuration to PC
display seed for password generation
display Revision and etc