Filter
Top Products
Prestige 100 and 100IH ISDN Router and Router/Hub
2-18 Hardware Installation and Setup
Figure 2-13 Menu 2 – ISDN Setup for 1TR6
Table 2-10 Menu 2 – ISDN Setup
Switch Type This field is fixed as DSS1or 1TR6.
In general, this is Switch/Switch. If you are only using one B channel
(e.g., your Prestige is sharing the ISDN BRI line with another device
on the S/T bus), then select Switch/Unused. The default is
Switch/Switch. The options for this field are:
B Channel Usage
♦ Switch/Switch
♦ Switch/Lease
♦ Leased/Switch
♦ Leased/Unused
♦ Unused/Leased
♦ Leased/Leased
♦ Switch/Unused
ISDN Data &
Subaddress
Enter the telephone number and the subaddress (DSS1 only)
assigned to ISDN data calls for the Prestige. The maximum number of
digits is 25 for the telephone number and 5 for the subaddress.
A/B Adapter 1 &
Subaddress
Enter the telephone number and the subaddress assigned to A/B
Adapter 1 (PHONE1).
A/B Adapter 2 &
Subaddress
Same as above for A/B Adapter 2 (PHONE2).
PABX Outside Line
Prefix
Enter the number for outside line access if the Prestige is connected to
a PABX; otherwise, leave it blank. The maximum number of digits is
4.
Outgoing Calling
Party Number
You only need to fill in this field if your switch requires a specific
Outgoing Calling Party Number; otherwise, leave it blank.
Menu 2 - ISDN Setup
Switch Type: 1TR6
B Channel Usage= Switch/Switch
ISDN Data =
A/B Adapter 1 =
A/B Adapter 2 =
PABX Outside Line Prefix =
Outgoing Calling party Number =
Incoming Phone Number Matching= Endgeraete Auswahl Ziffer (EAZ)
Analog Call Routing= N/A
Press ENTER to Confirm or ESC to Cancel:
Press Space Bar to Toggle.