Filter
Top Products
Prestige 100 and 100IH ISDN Router and Router/Hub
5-2 Remote Node TCP/IP Configuration
5.1.1 Remote Node Setup
Follow the procedure below to configure the TCP/IP parameters in Menu 11 - Remote Node
Profile.
Follow the steps below to edit Menu 11.3 - Remote Node Network Layer Options shown below.
Move the cursor to the Edit IP field, then press the space bar to toggle and set the value to Yes.
Press [Enter] to open Menu 11.3 - Network Layer Options.
Figure 5-2 Menu 11.3- Remote Node TCP/IP Options
Menu 11.3 - Remote Node Network Layer Options
IP Options:
Rem IP Addr: 0.0.0.0
Rem Subnet Mask= 0.0.0.0
My WAN Addr= 0.0.0.0
Single User Account= No
Metric= 2
Private= No
RIP Direction= Both
Version= RIP-2B
Enter here to CONFIRM or ESC to CANCEL: