Filter
Top Products
Prestige 100 and 100IH ISDN Router and Router/Hub
Remote Node TCP/IP Configuration 5-1
Chapter 5
Remote Node TCP/IP Configuration
This chapter shows you how to configure the TCP/IP parameters of a remote node. A typical
LAN-to-LAN application is to use your Prestige to connect a branch office to the headquarters, as
depicted in the following diagram.
5.1 LAN-to-LAN Application
Figure 5-1 TCP/IP LAN-to-LAN Application
For the branch office, you need to configure a remote node in order to dial out to the
headquarters. Additionally, you may also need to define static routes if some services reside
beyond the immediate remote LAN.