ZyXEL Communications 100IH Router User Manual


 
Prestige 100 and 100IH ISDN Router and Router/Hub
Remote Node TCP/IP Configuration 5-5
5.1.2 Static Route Setup
Static routes tell the Prestige routing information that it cannot learn automatically through other
means. This can arise in cases where RIP is disabled on the LAN or a remote network is beyond
the one that is directly connected to a remote node.
Each remote node specifies only the network to which the gateway is directly connected, and the
Prestige has no knowledge of the networks beyond. For instance, the Prestige knows about
network N2 in the following diagram through remote node Router 1. However, the Prestige is
unable to route a packet to network N3 because it doesn’t know that there is a route through
remote node Router 2. The static routes are for you to tell the Prestige about the networks beyond
the remote nodes.
Figure 5-4 Example of Static Routing Topology
Router2
Prestige
N1
N2
N3
Router1