A SERVICE OF

logo

8 - 18
8 Maintenance
MITSUBISHI CNC
< MDS-D2-V3 Series >
[1]
Remove the fan guard on the top of the drive unit...
[2]
Remove the fan.
[3]
Disconnect the connection connector of the fan mounted on
the unit side face.Disconnect the connection connector with
pressing both side of the connector.
[4]
Replace the fan.
Install the fan so that the fan label is the top face and the fan
cable is between the fan and P-plate.
Fan guard
Fan
Connection connector
P-plate
Fan
Fan cable