A SERVICE OF

logo

8 - 21
MDS-D2/DH2 Series Instruction Manual
8.3 Adding and Replacing Units and Parts
8.3.4 Replacing the Fuse
(1) Replacing parts
Fuse type
< Contact information >
Daito Communication Apparatus Co., Ltd.: http://www.daitotusin.co.jp/english/index.htm
(2) Replacement procedure
Replace the fuse with the following procedures.
Procedures
[1] Turn the breaker for the input power OFF. Make sure the power of the replacing drive unit is turned OFF.
[2] Open the terminal block cover located at the front of the drive unit.
[3] Pull out the fuse and replace it by a new fuse.
Type Fuse equipped unit
HM32 MDS-D2 series
HM16 MDS-DH2 series
Open the
terminal block
cover.
Pull out the fuse using forceps.