Filter
Top Products
Electromagnetic Compatibility (EMC) Measurements
27
Electromagnetic Compatibility (EMC) Measurements
The low frequency range of the Agilent 9304A make it the ideal choice for
making EMC measurements to CISPR (Comite International Special
Perturbations Radioelectriques) requirements, and electromagnetic
interference (EMI) test applications such as the radiated immunity test
(IEC61000-4-3).
DC coupling of the Agilent 9304A input allows excellent low frequency
coverage. However, the presence of any dc voltages mixed with the signal will
have an adverse effect on the accuracy of the power measurement - see Figure
11 on Page 36.
Caution The Agilent 9304A sensor is DC coupled. DC voltages in excess of the
maximum value (5 Vdc) can damage the sensing diode.